CNC Turning Centres

cj/0080 Specification Photograph	BEAVER TC15 CNC SLANT BED LATHE WITH SIEMENS SINUMERIK 820T CNC CONTROL. Supplied with a 210mm 3 jaw powered chuck, 10 station VDI turret, swarf conveyor, coolant pump & fittings. (1990) 210mm turning diameter x 400mm turning length.
cu/0432 Specification Photograph	DAEWOO PUMA 8UHS (ULTRA HIGH SPEED) CNC SLANT BED LATHE WITH FANUC OT CNC CONTROL. Supplied with 200mm 3 jaw chuck, 12 station turret, programmable tailstock, coolant pump & fittings. (1995) 330mm turning diameter x 400mm turning length.
cu/0537 Specification Photograph	HITACHI SEIKI HITEC-TURN HT-20 CNC LATHE WITH FANUC 10TE-F CNC CONTROL. Supplied with 200mm powered 3 jaw chuck, collet chuck, Sameca Monosam bar feed, tool setter, 12 station turret, tailstock, parts catcher, swarf conveyor & coolant system. (1989) 170mm turning diameter x 340mm turning length.
NEW STOCK Specification Photograph	IKEGIA FC-15N CNC CHUCKING LATHE WITH FANUC OT CNC CONTROL. Supplied with a 200mm powered chuck, 8 station turret, toolsetter, coolant pump & fittings. (1989) 210mm turning diameter x 310mm turning length x 45mm bar capacity.
cu/0323 & cu/0322	MAZAK QUICKTURN CHUCKER CNC LATHES WITH MAZATROL T-1 CNC CONTROL. Supplied with 200mm 3 jaw powered chucks, 4 station turret, loading device, coolant pump & fittings.
cu/0248 Specification	MAZAK QUICKTURN 10N UNIVERSAL LATHE WITH MAZATROL CAM T-2 CNC CONTROL. Supplied with 200mm 3 jaw powered chuck, 8 station turret, coolant pump & fittings. (1986) 150mm turning diameter x 500mm turning length.
cu/0307 Specification Photograph	MAZAK QUICKTURN 15N-C LATHE WITH MAZATROL CAM T32-2 CNC CONTROL. Supplied with Nikko 210mm 3 jaw powered chuck, 8 station turret, tooleye, coolant pump & fittings. (1991) 300mm turning diameter.
NEW STOCK Specification Photograph	NAKAMURA TOME SUPERTURN 2 CNC SLANT BED LATHE WITH FANUC 10TEF CNC CONTROL. Supplied with 200mm 3 jaw chuck, Crawford CDC-42 collet chuck, 10 station turret, tailstock, FMB Turbo 3500mm magazine bar feed, coolant pump & fittings. (1985) 330mm turning diameter x 400mm turning length,630mm swing over bed.
cu/0548 Specification Photograph	OKUMA HOWA ACT-3 2 AXIS CNC SLANT BED LATHE WITH FANUC 6T CNC CONTROL. Supplied with 10 station turret, tailstock, swarf conveyor. (1983) 240mm turning diameter x 580mm turning length x 46mm bar capacity.

cj/0146

Specification

Photograph

COLCHESTER CNC-2000L UNIVERSAL GAP BED TOOLROOM LATHE WITH FANUC OT CNC CONTROL which features contouring, linear and circular Interpolation. thread cutting - left hand, right hand, multi start, straight and taper threads, Supplied with Variable speed drive, 250mm 3 jaw chuck, Quick change toolpost, Overhead guarding, lovo lighting, coolant tank and fittings. (1986)

390mm turning diameter x 1250mm turning length.

cu/0527

Specification

Photograph

COLCHESTER TRIUMPH ELECTRONIC CNC GAP BED TOOLROOM LATHE WITH FANUC OT CNC CONTROL Supplied with Variable speed drive, 250mm 3 jaw chuck & 320mm 4 jaw chuck, Quick change toolpost, Overhead guarding, lovo lighting, coolant tank and fittings. (1994)

390mm turning diameter x 1250mm turning length.

NEW STOCK

cu/0553

Specification

Photograph

VICTOR V-TURN 26/60 2 AXIS CNC SLANT BED LATHE WITH FANUC OTC CNC CONTROL. Supplied with 250mm 3 jaw chuck, Crawford CDC-66 collet chuck, tailstock, parts catcher, tooling, swarf conveyor and swarf cart, coolant pump & fittings. (1995)

342mm turning diameter x 610mm turning length, 520mm swing over bed.

cu/0544 Specification Photograph	NAKAMURA TOME TMC-30 CNC SLANT BED LATHE WITH FANUC OTA CNC CONTROL. Supplied with Howa 300mm 3 jaw chuck, 10 station turret, tailstock, tooling, coolant pump & fittings. (1987) 330mm turning diameter x 550mm turning length, 500mm swing over bed.
cu/0350 Specification Photograph	NAKAMURA TOME TMC-30 CNC SLANT BED LATHE WITH FANUC OTA CNC CONTROL. Supplied with Howa 300mm 3 jaw chuck, 10 station turret, tooling, coolant pump & fittings. (1987) 330mm turning diameter x 550mm turning length, 500mm swing over bed.
cu/0435 Specification Photograph	NILES DFS 2/2 B43 x 2500 CNC SLANT BED LATHE WITH SIEMENS 3T CNC CONTROL. Supplied with 300mm 3 jaw chuck, 12 station turret, swarf conveyor, coolant pump & fittings. (1987) 480mm turning diameter x 2500mm turning length, 495mm swing over bed.
NEW STOCK cu/0566 Specification Photograph	VICTOR V-TURN 36/85 2 AXIS CNC SLANT BED LATHE WITH FANUC OTC CNC CONTROL. Supplied with 350mm 3 jaw chuck, 10 station turret, tailstock, tool setter, tooling and swarf conveyor, coolant pump & fittings. (1991) 320mm turning diameter x 850mm turning length, 520mm swing over bed.
cj/0173 Specification Photograph	WARNER & SWASEY TITAN HEAVY DUTY 4 AXIS SLANT BED CNC LATHE WITH GENERAL NUMERIC GNII CNC CONTROL. Supplied 380mm 3 jaw chuck, tool setter, 12 station upper turret, 8 station lower turret, tailstock with programmable quill, travelling steady & swarf conveyor. (1988) 450mm turning diameter x 1500mm turning length, 725mm swing over bed.

NEW STOCK

Specification

Photograph

OKUMA LC-10 2 AXIS CNC LATHE WITH OSP-3000 CNC CONTROL. Supplied with a Kitigawa CR42 collet chuck, 8 station turret, coolant pump & fittings. (1982)

42mm bar capacity.

cj/00135

Specification

Photograph

WINCHESTER MODEL 2600 CNC AUTOMATIC LATHE WITH OMEGA CNC CONTROL. Features include front & rear slides, 2 vertical slides, 4 toolposts, 8 station turret with full complement of toolhoders, spindle speed change through gear box, Pick off unit, Twin spindle second operation unit with motorised spindles, Haganuk magazine barfeed and stand, lovo lighting, coolant pump and fittings. (1990)

26mm Bar capacity, 150mm Chuck capacity.